ZJ-6650OCR
silicone gel

ZJ-6650OCR is a two-component addition molding silicone gel, which is suitable for the full fitting of various vehicle screens, computer screens, tablet screens, etc.

Product features

1. 1:1 mixed use, fast curing speed, heating can accelerate the curing speed

2. The product has low viscosity and can quickly self level

3. Low shrinkage rate

4. It has excellent optical performance

5. Good adhesion to the substrate

Product parameters
ZJ-6650OCR

project

Component A Component B
Appearance Transparent Transparent

Viscosity,mPa·s

1000±200

1000±200

Density,g/cm3

0.98±0.02

0.98±0.02

Containing catalyst components

B

Mixing ratio

1:1

Viscosity after mixing,mPa·s

1000±200

Operating time,min/25℃

>10

Cone penetration (1/4 cone),1/10mm

35-45

Shear strength (glass glass),MPa

>0.4

Positive tensile strength (glass glass),MPa

>0.3

Yellowing index

<0.2

Haze

<0.2

Transmittance,5

>99

Refractive index

1.405

Operating temperature, ℃

-45~200℃

The data in the table is for reference only, please refer to the measured data
Operation and Safety
  • Operation process
  • 1. Before sealing, use appropriate solvents such as alcohol and acetone to remove surface oil stains, dust, etc.
  • 2. Mix components A and B evenly by weight or volume ratio 1:1 before use. You can mix them manually or by equipment. After mixing, quickly pour them into the product. Due to the fast solidification of this product, in order to achieve better sealing effect, it is recommended to remove bubbles under vacuum.
  • 3. If the distribution ratio deviation of group A and group B is large, the gel will be soft or hard. The proportion should be strictly 1:1.
  • 4. This product belongs to an additive curing system, and the curing rate is only related to temperature. Heating up can accelerate the curing rate.
  • 5. Note that this product should not contact substances containing N, P, S, Sn, Pb, etc., otherwise, gel will not solidify.
  • 6. The unused A and B adhesive materials should be sealed and stored.
  • Safety instructions
  • ZJ-6650OCR is an addition cured silicone rubber that contains neither toxic nor corrosive substances. Special handling precautions may be required and general industrial hygiene regulations should be followed.
  • Hazard indications/safety recommendations/transportation rules:
  • Wear protective gloves for long-term or repeated contact.
  • Keep away from heat sources/sparks/open flames, prohibit smoking, and keep the container closed. Use explosion-proof electrical/ventilation/lighting equipment.
  • Transport according to non hazardous materials.
Color and packaging

20kg or 180kg barrels or other specifications of packaging, the product is in a sealed state, cool and dry conditions, and the storage period is 12 months from the date of production.

Storage and expiration date

The product is stored in a sealed, cool and dry condition for 12 months from the date of production.